Apple AirPods and AirPods Pro have become essential accessories for many users, offering convenience and high-quality audio. However, there may come a time when you need to factory reset your AirPods such as not charging or frequently disconnecting from our devices, also preparing them for a new user.
In such cases, performing a factory reset is often the solution. This is generally a straightforward procedure; however, the steps may differ depending on whether you have immediate access to your phone or if the devices were purchased secondhand. In this ultimate guide, we will walk you through the process of resetting your AirPods and provide tips for maintaining them post-reset.
What Is The Time AirPods Need To Be Reset?
Troubleshooting Issue
Determining the appropriate time to reset your AirPods may be necessary if you encounter issues such as failure to charge or frequent disconnections from your iPhone/iPad.
Deleting Paired Connection For A New User
If you are selling your AirPods, it is important to remove the AirPods from your Apple ID. Similarly, if you are purchasing second-hand AirPods, ensure that the previous owner has unpaired them from their account. Keep in mind that AirPods can only be associated with one Apple ID at a time. If the previous owner has not properly unregistered them, you will be unable to set them up on your account. Beside, the previous owner may still have access to the location of the AirPods, but you can prevent this by performing a factory reset.
Steps-by-steps To Factory Reset AirPods And AirPods Pro
If you find yourself needing to factory settings your AirPods, whether they are AirPods or AirPods Pro, there are several methods you can follow to initiate a factory reset. Let’s delve into the steps for resetting your AirPods.
Direct Resetting AirPods Pro
– Place your AirPods back in their charging case and shut the cover. Wait for approximately 30 seconds.
– Access the Bluetooth settings on your paired iPhone or iPad. Navigate to the Bluetooth section in the Settings menu.
– Locate your AirPods in the list of paired devices and click on the “i” icon next to them.
– Select “Forget This Device” to disconnect your AirPods from all devices.
– Open the lid of the AirPods’ charging case.
– Press and hold the setup button for about 15 seconds. The light on the case will change from flashing white to flashing amber. Once the light in front of the case flashes white, release the button and close the lid.
– Open the lid again and place the AirPods near your device. This will initiate the setup process, allowing you to reconnect your AirPods.
Resetting AirPods Pro Using Apple Device
If you own AirPods Pro and have an Apple device, you can reset them by navigating to the Settings app on your iPhone or iPad. From there, select Bluetooth, tap the “i” icon next to your AirPods Pro, and choose “Forget This Device.” After unpairing, follow the steps outlined earlier to reset your AirPods Pro using the charging case.
Resetting AirPods Without The Original Device.
If you don’t have access to the original Apple device your AirPods are paired with, you can still perform a reset. Here’s what you need to do:
– Place your AirPods into the charging case and let the lid open.
– Locate the button on the back of the case.
– Hold down this button for approximately 15 seconds. The light on the case will go from blinking white to case flashes amber. Once the light changes back to blinking white, you can release the button and close the lid. Your AirPods have now been reset!
Remember, your AirPods will still be linked to your Apple ID even after resetting them. To remove them from your Apple ID, you need to unlink them from your Find My Device or iCloud account.
Checking Successful Reconnection After Reset Your Airpods
After successfully resetting your Apple AirPods, it’s important to ensure that they reconnect seamlessly with your Apple devices. We’ll discuss the steps for reconnecting your AirPods to your iPhone, iPad, and Mac, as well as guide checking the status light after the reset.
Reconnecting AirPods to iPhone
To reconnect your AirPods to your iPhone, open the charging case close to your iPhone and follow the setup instructions that appear on your screen. This will establish a connection and allow you to resume using your AirPods with your iPhone.
Pairing AirPods with Mac
If you use AirPods with a Mac, go to the Apple menu, select System Preferences, then choose Bluetooth. Find your AirPods in the device list and click the “Connect” button to pair them with your Mac.
Checking AirPods Status Light After Reset
Once you have reset your AirPods and reconnected them to your devices, keep an eye on the status light on the front of the charging case. A solid green light indicates that your AirPods are fully charged, while a solid amber light signifies that they are currently charging.
Common Issues Faced After AirPods Reset
Following a factory reset AirPods or AirPods Pro, you may encounter various troubles resetting your AirPods related to Bluetooth connectivity, status light indicators, and sound quality. Here’s how to address some of the common issues that may arise post-reset.
Bluetooth Connection with AirPods
If you experience difficulty with the Bluetooth connection after resetting your AirPods, make sure that Bluetooth is enabled on your device and that your AirPods are within range. A simple restart of your device or the AirPods can also help resolve connectivity issues.
Flashing Amber Status Light
If the status light on your AirPods charging case continues to flash amber after a reset, it could indicate a low battery level. Simply charge your AirPods in the case for a sufficient duration to restore them to full capacity.
Sound Quality Problems
Make sure that your AirPods are clean and free from any debris that could be affecting the audio output. You can also adjust the audio settings on your device to optimize the sound quality of your AirPods.
Getting No Sound?
If despite having the latest software, your AirPods are charged and connected but you still can’t hear any sound, ensure that they are designated as your primary audio device.
I have come across this issue with several Bluetooth headsets, especially if you have multiple devices connected to your phone. One device may take precedence over the others, so you need to actively choose your AirPods as the audio output.
Just go through the pairing process one more time, and that will establish your AirPods as the primary audio device. If this doesn’t work and a reset doesn’t resolve the issue, then it may be time to reach out to support.
Only Getting Sound In One AirPod
If you are experiencing sound only coming from one of your AirPods and performing a reset did not resolve the issue:
- Put your AirPods Back in their case, and close the case for about 15 seconds.
- Then check the charging status of both AirPods on your paired iPhone/iPad.
- If only one side is showing as charged, then make sure the charging connection for the flat AirPod is clean of any debris and try and charge them for a few minutes.
- Check the status again and if they are both charging then you’re good to go.
- If both sides are showing as charged and you are still only getting sound in one AirPod, or low sound on one side, you might want to check the balance in your Audio/Visual Settings menu. Make sure the balance is in the middle.
- Developed a fault and it’s probably time to reach out to Apple Support. If the balance is ok, but the issue persists, then chances are the AirPods have.
How To Fix When AirPods Not Reset?
If you are experiencing difficulty resetting your AirPods, it can be quite frustrating. However, there are troubleshooting steps that you can take to resolve this problem. Whether it pertains to issues with the charging case connection, Apple ID, or an unresponsive setup button, we will walk you through potential solutions.
It may also be beneficial to cleanse the charging port located at the bottom of the case to ensure proper contact.
Furthermore, it is important to verify that the iOS on your AirPods and paired devices is up to date. Outdated software can lead to glitches over time.
If cleaning and updating the software does not resolve the issue, it may be necessary to reach out to Apple Support for assistance.
Troubleshooting Charging Case Connection
If your AirPods won’t reset due to issues with the charging case, make sure the case is charged, and the AirPods are seated properly inside. Additionally, ensure that the case’s lid is securely closed before attempting the reset process.
Issues with Apple ID and AirPods Reset
If you’re encountering difficulty resetting your AirPods due to Apple ID-related issues, confirm that your Apple ID is signed in on the device used to reset the AirPods. Otherwise, you may encounter obstacles during the reset procedure.
Resetting AirPods with Unresponsive Setup Button
In the scenario where the setup button on the back of the charging case is unresponsive, try cleaning the button to ensure there are no obstructions hindering its functionality. If the issue persists, contact Apple Support for further assistance.
Tips for Maintaining Your AirPods
Proper maintenance is crucial for preserving the functionality and performance of your AirPods. In this section, we’ll provide tips on protecting the charging case, keeping your AirPods clean and functional, and managing the battery health of your AirPods.
Protecting AirPods Charging Case
To protect your AirPods charging case from scratches and potential damage, consider investing in a protective case cover. This can safeguard the case from everyday wear and tear, ensuring it remains in pristine condition.
Keeping AirPods Clean and Functional
Regularly cleaning your AirPods and the charging case can help maintain their functionality and prolong their lifespan. Use a soft, dry cloth to gently wipe the surfaces and remove any buildup of dirt or debris.
Managing AirPods Battery Health
To preserve the battery health of your AirPods, avoid exposing them to extreme temperatures and always store them in their charging case when not in use. Additionally, it’s recommended to partially charge or discharge the AirPods at least once every six months to optimize battery performance.
